RepairHeating

Furnace Repair on Long IslandHeat back on — fast.

24/7 emergency furnace repair across Long Island. Most no-heat calls fixed on the first visit.

Fully insured 24/7 dispatch Background-checked techs
EPA 608 CertifiedFully InsuredCOI on RequestBackground-Checked
Furnace Repair on Long Island — EPA 608-certified HVAC technician on the job
Long Island, NY
Real techs. Real trucks. Same-day dispatch most days.
Why us for furnace repair
  • 24/7 emergency response
  • Common parts stocked on every truck
  • Gas, oil & electric furnaces
  • Up-front pricing before work begins
Long Island furnace repair

Furnace Repair across Nassau & Western Suffolk

Quick answer

Long Island HVAC Repair provides 24/7 emergency furnace repair for gas, oil, and electric systems across Nassau and Western Suffolk. Our trucks carry the most common failure parts — ignitors, flame sensors, inducer motors, capacitors, and gas valves — and ~85% of no-heat calls are fixed on the first visit with flat-rate pricing and a 1-year warranty.

When the heat fails on a January night, we move quickly. Our techs carry the most common furnace parts — ignitors, flame sensors, capacitors, and inducer motors — to fix problems on the first visit.

Warning signs

Common signs you need furnace repair

Catching these early prevents emergency calls and bigger repair bills down the road.

No heat at all

Tripped pressure switch, failed ignitor, dirty flame sensor, or thermostat issue.

Furnace short cycles

Overheating from a clogged filter, failing limit switch, or oversized unit.

Loud bangs at startup

Delayed ignition — gas builds up before lighting. Stop using and call immediately.

Yellow burner flame

Should be steady blue. Yellow indicates incomplete combustion and a CO risk.

Blower runs constantly

Stuck fan limit switch or thermostat wired to "on" instead of "auto".

CO detector alarm

Leave the house, call 911, then call us. We test heat exchangers on every call.

Common causes

What's typically going wrong

01
Failed ignitors

The single most common no-heat call. Hot-surface ignitors crack after 5–7 winters. We replace them in 30 minutes.

02
Dirty flame sensors

Carbon buildup prevents the sensor from proving flame; the gas valve closes for safety. Cleaned in 15 minutes.

03
Cracked heat exchanger

Serious safety issue — releases CO into your home. Found by camera inspection. Replacement is usually a new furnace.

04
Bad inducer motor

Common on 10+ year old high-efficiency furnaces. Easy diagnosis, $400–$800 part.

05
Thermostat & control board

Wiring issues, dead batteries, or a failed control board prevent the furnace from getting the call for heat.

Decision guide

Repair or replace?

Repair if…

Furnace is under 12 years old, repair is under $1,200, and the heat exchanger is sound.

Replace if…

Heat exchanger is cracked, unit is 15+ years old, or the repair exceeds $1,500.

Honest pricing

Long Island furnace repair cost ranges

Real numbers based on actual installs across Nassau and Western Suffolk. Final pricing depends on your home — we always quote in writing before any work begins.

Get an exact quote
Diagnostic visit
Waived with approved repair
$199–$199
Hot-surface ignitor
$220–$380
Flame sensor cleaning
$140–$220
Inducer motor replacement
$540–$960
Gas valve replacement
$500–$900
Control board replacement
$520–$1,000
After-hours / weekend premium
+$95–$150

Pricing reflects typical Long Island ranges. Equipment, complexity, and incentives may increase or reduce your final cost.

Our process

What to expect, step by step

01
Call 24/7

Live dispatcher, no answering service. Most no-heat calls dispatched within 90 minutes.

02
Diagnose & quote

Tech identifies the failure and presents a flat-rate quote in writing — and we always check the heat exchanger.

03
Fix on the spot

Common parts ride on every truck. ~85% of no-heat calls completed first visit.

04
Safety verified

Combustion analyzer confirms safe CO levels and proper draft before we leave.

Long Island furnace repair — EPA 608-certified technician on the job
On the job

Long Island homes, treated like our own

Every furnace repair job starts with shoe covers, drop cloths, and a walk-through with the homeowner. We document with photos, explain what we found, and quote in writing — no surprises.

  • Background-checked, uniformed technicians
  • Photos of every issue, before & after
  • Flat-rate pricing approved before we start
Brands we service

Every major HVAC brand, serviced and installed

Carrier
Lennox
Trane
Rheem
Bryant
Goodman
Weil-McLain
Burnham
FAQ

Furnace Repair questions, answered

Yes. Our dispatch line is staffed around the clock. For a complete no-heat in winter, we typically arrive within 90 minutes anywhere in Nassau and Western Suffolk.

Yes — we service gas, oil, and electric heating equipment. Oil-furnace repairs and tune-ups are a Long Island specialty for us given the older housing stock.

Most often: tripped breaker, dead thermostat batteries, dirty flame sensor, or a failed ignitor. We diagnose all four within 15 minutes of arrival.

Yellow burner flames, soot, a chemical smell, or persistent CO alarm. We use a camera and combustion analyzer on every call to confirm.

A small premium of $95–$150 applies for service after 9pm and on holidays. Maintenance plan members get the after-hours fee waived.

If your furnace is 15+ years old and the repair quote is over $1,500 — or if the heat exchanger is cracked — replacement is almost always the better long-term value.

Yes. If your CO detector is alarming, leave the house immediately, call 911, then call us. We perform combustion safety analysis on every emergency call.

Ready when you are

Need furnace repair on Long Island?

Talk to a real Long Island technician — usually same-day appointments, flat-rate pricing, and a 1-year warranty on every visit.